8K DisplayPort 2.0 Active Optical Cable — 60

Name: 8K DisplayPort 2.0 Active Optical Cable — 60
Brand: KanexPro
SKU: CBL-AOCDP8K-60M

40Gbps UHBR10 | 8K@60Hz | 4K@144Hz | AMD FreeSync® 2.0 | 3-Year Warranty

CBL-AOCDP8K-60MUPC 813982023413

In stock

8K DisplayPort 2.0 Active Optical Cable — 60 – KanexPro CBL-AOCDP8K-60M

Trade pricing and stock

Specifications, drawings and documents stay open to everyone. Net pricing, stock by warehouse and ordering need an approved trade account.

Apply Sign in

Approval is usually same working day.

Overview

KanexPro Active Optical DisplayPort 2.0 Cables deliver full, uncompressed 40Gbps UHBR10 signal across runs of 30, 60, or 90 meters — far beyond copper cable limits. Built on a hybrid 4× optical fiber + 8× copper construction, these plug-and-play cables carry 8K@60Hz, 4K@144Hz, and HDR with zero signal loss, drawing power directly from the DisplayPort source — no wall adapters or repeaters required.

Supporting MST daisy-chaining, AMD FreeSync® 2.0, Dolby Vision, HDCP 1.4/2.2, and full EDID management, the CBL-AOCDP8K series is engineered for professional AV environments where EMI immunity and signal integrity are non-negotiable. Backed by KanexPro's 3-year warranty.

Key features

Supports DisplayPort 2.0 UHBR10 standard — 10Gbps per lane, 40Gbps total bandwidth
Resolutions up to 8K@60Hz and 4K@144Hz with 48-bit color depth
High Dynamic Range (HDR) video pass-through including Dolby Vision
Multi-Stream Transport (MST) support for daisy-chaining multiple displays
AMD FreeSync® 2.0 compatible for variable refresh rate displays
HDCP 1.4 and HDCP 2.2 compliance for protected content delivery
Full EDID support and bidirectional AUX channel for link training
Supports DisplayPort Dual-Mode (DP++) for passive adapter compatibility
Bus-powered — draws <0.5W per end from source device; no external power required
EMI/RFI immune optical transmission — 4× 850nm fiber + 8× copper hybrid, 4.8mm OD
Directional cable: SOURCE and DISPLAY ends labeled on each connector

Specification	Value
Signal
Standards	DisplayPort 2.0 / UHBR10 · HDCP 1.4 / 2.2
Bandwidth	10Gbps per lane · 40Gbps total
Max Resolution	8K @ 60Hz (7680×4320)
Max Refresh (4K)	4K @ 144Hz
Color Depth	48-bit
Pixel Clock	810 MHz
Construction
Connector	20-pin DisplayPort Male (both ends, directional)
Optical Technology	4× 850nm Multi-mode VCSEL Tx · 4× GaAs PIN Rx
Cable Type	Hybrid: 4× optical fiber + 8× copper conductor
Cable OD	4.8mm
Length	60 meters (197 ft.)
Power
Power Source	Bus-powered from DisplayPort source (3.3V)
Power Consumption	<0.5W per end · No external supply required
Environmental
Operating Temperature	0°C to 50°C
Storage Temperature	−20°C to 80°C
Humidity	5% to 85% non-condensing
Mechanical
Min Bend Radius	48mm
Max Tensile Load	300N

8K DisplayPort 2.0 Active Optical Cable — 60 panel drawing

8K DisplayPort 2.0 Active Optical Cable — 60 system diagram

8K DisplayPort 2.0 Active Optical Cable — 60 applications

Spec sheet~~Full specification~~

Sales sheet~~For bid packages~~

What pixel clock does it support?

810 MHz.

What bandwidth and resolution does the cable carry?

DisplayPort 2.0 UHBR10, 10Gbps per lane and 40Gbps total, up to 8K@60Hz (7680x4320) and 4K@144Hz at 48-bit colour.

How is an optical cable of this length driven?

Four 850nm multi-mode VCSEL transmitters and four GaAs PIN receivers, over a hybrid of four optical fibres and eight copper conductors, 4.8mm outside diameter.

Is it HDCP compliant?

Yes, HDCP 1.4 and 2.2.

Does the cable need a power supply?

No. It is bus-powered from the DisplayPort source at 3.3V, using under 0.5W per end.

How tightly can it be bent, and how hard can it be pulled?

Minimum bend radius is 48mm and maximum tensile load is 300N. The run is 60 metres (197 ft.).

The display stays black after the cable is fitted.

The cable is directional. The end marked for the source must go to the source and the other to the display; reversed, it will not link.

It works at 4K but not at 8K.

8K@60Hz needs the full UHBR10 link. Confirm both the source and the display are DisplayPort 2.0 UHBR10 devices.

Can it be pulled through conduit?

Yes, within a 48mm bend radius and 300N tensile load. It is rated 0 to 50 degrees C operating.