16x16 XLR Audio Bridge with Dante® and PoE+, 19" Rack Mount
One Chassis Replaces Separate Input and Output Units - 16 XLR/TRS Combo In, 16 XLR Out, +48V Phantom Power

Puts sixteen microphone or line sources onto a Dante® network and returns sixteen balanced feeds to analog gear, all from one 19" rack-mount chassis. The AUD-DTE-16X16XLR has 16 XLR/TRS combo inputs, each with switchable +48V phantom power, and 16 balanced XLR outputs. All 32 channels are bridged to and from Dante® and AES67 through primary and secondary RJ45 ports.
Each input has six sensitivity settings, from -35dBV for microphones up to +24dBu for hot line-level gear, plus a fine gain trim of +/-12dB. An 8-band parametric EQ (+/-15dB) is available on every input and output, each output has delay, and five presets store complete room setups. Routing and latency are set in Dante® Controller, and levels, EQ and presets are set from the built-in Web GUI or by ASCII commands over TCP/IP or Telnet. If the primary network fails, the secondary port takes over automatically. The strongest reason to choose it is consolidation: one chassis does the work of separate 16-channel input and output units, or of sixteen 2-channel endpoints, at the head end.
- 16 balanced analog inputs on XLR/TRS combo connectors
- 16 balanced analog outputs on XLR connectors
- Dante® 16x16 and AES67 audio input and output
- Primary and secondary Dante® RJ45 ports; if the primary network fails, the secondary port takes over automatically
- Accepts and delivers balanced or unbalanced analog audio
- +48V phantom power on each input, switched per input from the Web GUI or the API, with a rear-panel indicator for each input
- Global 0dBFS line-up selection: -35dBV, -18dBV, 0dBV, +4dBu, +14dBu or +24dBu
- Per-input gain trim from -12dB to +12dB in 0.1dB steps
- Per-output level selection: +20dBu, +14dBu, +4dBu, 0dBV or -18dBV
- Built-in DSP for sensitivity gain, 8-band PEQ and delay
- 8-band PEQ on every input and output (+/-15dB), with Parametric, Lowpass, Highpass, Low Shelf and High Shelf filters, stereo-pair linking, and copy, import and export of settings
- Delay on each output
- Dante® audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz sampling rates, at 16 or 24 bits
- Dante® device latency of 2, 3, 4, 5 or 10ms
- Five preset scenes, each storing every setting except the network settings
- Channel names of up to 32 characters for every input and output
- Configuration from the built-in Web GUI, with separate Admin and User accounts, or from Dante® Controller
- ASCII API control over TCP/IP (port 8000) and Telnet (port 23); both ports can be changed
- Configuration export and import, and firmware update from the Web GUI
- Standard 19" rack-mount metal enclosure with mounting ears included
- Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
| Audio and Network | |
| Audio Channels | 16 analog inputs, 16 analog outputs |
| Dante® Audio Format | Dante®/AES67 digital audio in/out; 44.1kHz, 48kHz, 88.2kHz or 96kHz; 16-bit or 24-bit |
| Audio Latency | Dante® device latency of 2, 3, 4, 5 or 10ms, set in Dante® Controller |
| Network Bandwidth | Dante® network, 1000Mbps |
| Transmission Distance | 328ft (100m) over CAT6/6A/7 |
| Audio Performance | |
| THD+N | < 0.01% at +4dBu, 1kHz |
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
| Frequency Response | 20Hz to 20kHz (+/-0.5dB) |
| Mic/Line Inputs | |
| Connectors | 16 × XLR/TRS combo, female |
| Signal | Analog audio, balanced or unbalanced |
| Input Level, Line | Max +24dBu (12.28Vrms) balanced; max +18dBu (6.14Vrms) unbalanced |
| Input Level, Mic | Min -35dBV |
| Input Sensitivity | +24dBu, +14dBu, +4dBu, 0dBV, -18dBV or -35dBV, per input |
| Input Gain Trim | -12dB to +12dB in 0.1dB steps |
| Input Impedance | 20k Ohm balanced; 10k Ohm unbalanced |
| Phantom Power | +48V, switchable per input |
| Line Outputs | |
| Connectors | 16 × XLR, male |
| Signal | Analog audio, balanced or unbalanced |
| Output Level | Max +20dBu (7.75Vrms) balanced; max +14dBu (3.875Vrms) unbalanced; min -18dBV |
| Output Level Selection | +20dBu, +14dBu, +4dBu, 0dBV or -18dBV, per output |
| Output Impedance | 600 Ohm balanced; 300 Ohm unbalanced |
| XLR Pinout | Pin 1 Ground/Shield; Pin 2 Positive/Hot; Pin 3 Negative/Cold (inputs and outputs) |
| DSP | |
| Parametric EQ | 8 bands on every input and output |
| Filter Types | Parametric, Lowpass, Highpass, Low Shelf, High Shelf |
| EQ Gain | -15dB to +15dB in 0.1dB steps |
| EQ Frequency | 20Hz to 20kHz |
| EQ Q | 0.02 to 16 in 0.01 steps |
| Output Delay | Adjustable per output |
| Presets | 5 scenes |
| Control | |
| Configuration | Built-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV |
| API Control | ASCII commands over TCP/IP (default port 8000) and Telnet (default port 23) |
| IP Addressing | DHCP (default) or static, set separately for primary and secondary networks |
| Connectors | |
| Mic/Line Inputs | 16 × XLR/TRS combo, female |
| Line Outputs | 16 × XLR, male |
| Dante® Primary | 1 × locking RJ45, PoE+ PD (IEEE 802.3at, Class 4); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control |
| Dante® Secondary | 1 × locking RJ45, PoE+ PD (IEEE 802.3at, Class 4); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control |
| Power | 1 × 2-pin locking DC jack, 12V DC, max 2.5A |
| Ground | 1 × chassis ground terminal |
| Indicators and Buttons | |
| Front Panel | POWER LED, STATUS LED, RESET button |
| Rear Panel | +48V phantom power indicators |
| Power | |
| Power Consumption | 19.44W max |
| Physical | |
| Housing | Metal enclosure |
| Color | Black |
| Mounting | Standard 19" rack mount |
| Dimensions (W × D × H) | 17.32 × 7.87 × 3.46 in (440 × 200 × 88mm) |
| Weight | 6.88 lbs (3.12kg) |
| Environmental | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Storage Humidity | 10% to 90% RH, non-condensing |
| ESD Protection | IEC 61000-4-2: +/-8kV air-gap discharge, +/-4kV contact discharge |
| Package Contents | |
| 1 | AUD-DTE-16X16XLR 16x16 XLR Audio Bridge with Dante® and PoE+ |
| 1 | 12V/2.5A locking power supply with multinational conversion plugs |
| 2 | Mounting ears |
| 8 | Machine screws |
What input levels and gain adjustment does each input offer?
What output levels and delay can I set on each output?
What equipment does it typically connect to?
Can I control it from the RelayAV app?
How are the XLR connectors wired?
How do I find the unit's IP address the first time?
A condenser microphone gives no signal. What should I check?
I can't reach the Web GUI or API. What should I check?
Can I connect microphones directly?
Do I still need a separate DSP?
Ask Claude, ChatGPT or Copilot about the AUD-DTE-16X16XLR: its specifications, your price, stock, and a draft order for you to place. Or wire the REST API into your quoting tool or ERP.




