8x8 XLR to Dante/AES67 Audio Bridge with +48V Phantom, PEQ and Delay, 1U
Mic and Line Sources onto a Dante® Network Without a Separate Preamp or DSP - 8-Band PEQ, 50ms Delay, Web GUI Control

Puts eight mic or line sources onto a Dante® network, and brings eight Dante® channels back out to analog XLR, from a single rack unit with no separate preamp or DSP. AUD-DTE-8X8XLR is a 1U, 19-inch metal bridge. It has eight XLR/TRS combo inputs with switchable +48V phantom power on every channel and eight balanced XLR line outputs.
Each input offers six sensitivity settings from -35dBV to +24dBu, so wireless receivers, condenser mics, mixers and playback devices connect directly. Each output offers five levels up to +20dBu, so it can feed amplifiers, IEM transmitters and legacy DSPs. On-board DSP provides gain, an 8-band parametric EQ on every input and output, up to 50ms of output delay, and five recallable preset scenes. The unit carries Dante® 8x8 with AES67 at 44.1kHz to 96kHz, 16 or 24 bits, with device latency selectable from 2ms to 10ms. You can set it up in Dante® Controller and the built-in Web GUI, and control systems can drive it over an ASCII API on TCP/IP or Telnet. One unit does the work of eight 2-channel endpoints.
- Eight balanced analog inputs on XLR/TRS combo connectors that accept XLR or TRS plugs
- Eight balanced analog outputs on male XLR connectors
- Dante® 8x8 and AES67 audio input and output
- Balanced and unbalanced analog audio supported on both inputs and outputs
- +48V phantom power on every input, switchable per channel, with a rear-panel indicator for each input
- Adjustable global 0dBFS line-up, with six input sensitivity levels (+24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV) and five output levels (+20dBu, +14dBu, +4dBu, 0dBV, -18dBV)
- Built-in audio DSP for sensitivity, gain, 8-band parametric EQ and delay
- 8-band PEQ on every input and output with +/-15dB of gain per band, and Parametric, Lowpass, Highpass, Low Shelf and High Shelf filter types
- Up to 50ms of delay per output
- Stereo-pair EQ linking, plus EQ copy, import and export between channels
- Five preset scenes that store every setting except network configuration
- Dante® sampling rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz at 16 or 24 bits
- Dante® device latency selectable at 2, 3, 4, 5 or 10ms
- Configuration in the built-in Web GUI (Admin and User accounts) or in Dante® Controller
- ASCII API control over TCP/IP and Telnet for third-party control systems
- DHCP or static IP addressing per network, with host-name (.local) access to the Web GUI
- Powered from a PoE+ (IEEE 802.3at, Class 4) switch port or the included 12V locking power supply, 15.36W max, so a rack with PoE+ switching needs no local outlet
- Standby and sleep modes with adjustable auto-standby
- Settings export and import, and firmware updates from the Web GUI
- Up to 328ft (100m) per network run over CAT6/6A/7
- Standard 1U 19-inch rack-mount metal enclosure with grounding terminal
- Works with RelayAV, KanexPro's control app: each output's gain, mute, delay and level, each input's gain, mute, sensitivity, delay and 48 V phantom power, DCA groups, input and output EQ, expander, limiter, presets, auto standby and power, from the RelayAV app
| Analog Audio | |
| Inputs | 8x XLR/TRS combo, female; balanced/unbalanced; mic or line level |
| Outputs | 8x XLR, male; balanced/unbalanced; line level |
| Phantom Power | +48V, switchable per input |
| Input Sensitivity | +24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV (selectable per input) |
| Input Level | Balanced line: max +24dBu (12.28Vrms); unbalanced line: max +18dBu (6.14Vrms); balanced mic: min -35dBV (17.78mVrms) |
| Input Impedance | 20k Ohm balanced; 10k Ohm unbalanced |
| Output Level Settings | +20dBu, +14dBu, +4dBu, 0dBV, -18dBV (selectable per output) |
| Output Level | Balanced: max +20dBu (7.75Vrms); unbalanced: max +14dBu (3.875Vrms); min -18dBV |
| Output Impedance | 600 Ohm balanced; 300 Ohm unbalanced |
| Frequency Response | 20Hz–20kHz (+/-0.5dB) |
| THD+N | <0.01% at +4dBu, 1kHz |
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
| XLR Pinout | Pin 1: ground/shield; Pin 2: positive (hot); Pin 3: negative (cold) |
| DSP | |
| Input Gain | -12dB to +12dB in 0.1dB steps, with mute, per input |
| Parametric EQ | 8 bands per input and output; Parametric, Lowpass, Highpass, Low Shelf, High Shelf |
| EQ Range | Gain +/-15dB (0.1dB steps); frequency 20Hz–20kHz; Q 0.02–16 (0.01 steps) |
| Delay | 0–50ms per output |
| Preset Scenes | 5 (store all settings except network configuration) |
| Dante® / Network | |
| Dante® Channels | 8 x 8, Dante®/AES67 |
| Sample Rate / Bit Depth | 44.1kHz, 48kHz, 88.2kHz, 96kHz; 16/24-bit |
| Device Latency | 2, 3, 4, 5 or 10ms (set in Dante® Controller) |
| Network Bandwidth | 1000Mbps |
| Transmission Distance | 328ft (100m) over CAT6/6A/7 |
| IP Addressing | DHCP (default) or static, per network |
| Control | |
| Configuration | Built-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV |
| API Control | ASCII commands over TCP/IP (default port 8000) and Telnet (default port 23) |
| Firmware Update | Via Web GUI |
| Indicators and Buttons | |
| Front Panel | POWER LED, STATUS LED, RESET button |
| Rear Panel | 8x +48V phantom power indicators; GND terminal |
| Power | |
| Power Consumption | 15.36W max |
| Physical | |
| Form Factor | 1U, 19-inch rack mount |
| Housing | Metal, black |
| Dimensions (W x D x H) | 17.32 x 7.87 x 1.75 in (440 x 200 x 44.5 mm) |
| Weight | 4.85 lbs (2.2 kg) |
| Environmental | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Storage Humidity | 10% to 90% RH, non-condensing |
| ESD Protection | IEC 61000-4-2: +/-8kV air-gap discharge, +/-4kV contact discharge |
| Package Contents | |
| 1x | 8x8 XLR to Dante®/AES67 Audio Bridge (AUD-DTE-8X8XLR) |
| 1x | 12V/2.5A locking power supply |
| 2x | Rack-mounting ears |
| 8x | Machine screws |
What input sensitivity settings are available, and what are the maximum input levels?
What output levels can it drive?
Can a control system drive it directly?
What do I use to configure it, and what does each tool handle?
How are the XLR connectors wired?
How does it get an IP address?
The POWER LED does not light. What should I check?
A condenser microphone gives no signal. What should I check?
Is this a full Dante device, and does it work with AES67 systems?
Can I connect microphones directly, or only line-level sources?
Ask Claude, ChatGPT or Copilot about the AUD-DTE-8X8XLR: its specifications, your price, stock, and a draft order for you to place. Or wire the REST API into your quoting tool or ERP.




