4x4 Mic/Line Dante® and AES67 Bridge with 8-Band PEQ and Delay
Tune and Time-Align at the Interface - 8-Band PEQ on All 8 I/O, Up to 50ms Delay per Output, Mic to +24dBu Line-Up

Brings four mic or line sources onto Dante® and returns four Dante® channels to analog, tuned and time-aligned at the interface, from one device on one network drop. The AUD-DTE-4X4LINE is a black metal unit measuring 7.87 x 7.09 x 1.73 in. It has two locking RJ45 Dante® ports, primary and secondary, and runs on PoE+ or the supplied 12V/2.5A locking DC supply, drawing 8.64W at most. Four balanced or unbalanced inputs and four balanced or unbalanced outputs terminate on 3.5mm Phoenix connectors. It is the right choice for meeting rooms, lecture halls, houses of worship and venues where channels per drop and I/O-level DSP matter more than a stack of 2-channel adapters.
Each input has switchable +48V phantom power, and a global 0dBFS line-up runs in six steps from -35dBV to +24dBu. One unit therefore handles a condenser mic, consumer playback gear or a hot +24dBu line feed. Every input and output has an 8-band PEQ (±15dB) with parametric, low-pass, high-pass and shelving filters, and each output has up to 50ms of delay. Five preset scenes store every setting except the network settings. The unit carries Dante® and AES67 audio at 44.1kHz to 96kHz, 16/24-bit. You configure it from the built-in Web GUI or Dante® Controller and control it over TCP/IP or Telnet. It joins the rest of the KanexPro Dante® range, from amplifiers and wall plates to 2-channel adapters, so one room can be built from one catalogue.
- 4x mic/line audio inputs, balanced or unbalanced
- 4x audio outputs, balanced or unbalanced
- Dante® 4x4 audio input/output with AES67 support
- 2x locking RJ45 Dante® ports: primary and secondary
- Switchable +48V phantom power on each input, with a phantom power indicator per input
- Adjustable global 0dBFS line-up selection: -35dBV, -18dBV, 0dBV, +4dBu, +14dBu, +24dBu
- Built-in audio DSP for sensitivity, gain, 8-band PEQ and delay
- 8-band PEQ (±15dB) on every input and output, with parametric, low-pass, high-pass, low-shelf and high-shelf filters
- Up to 50ms of delay per output
- PEQ copy, import and export between channels and files
- Five preset scenes for storing and recalling settings
- Master group and standby control
- Dante® audio at 44.1kHz, 48kHz, 88.2kHz and 96kHz sampling rates, 16/24-bit
- Configuration through the built-in Web GUI, with Admin and User accounts, or Dante® Controller
- ASCII command control over TCP/IP (port 8000) and Telnet (port 23)
- Powered by PoE+ or by a 12V/2.5A locking DC supply
- Up to 328 ft (100m) over CAT6/6A/7
- Works with RelayAV, KanexPro's control app: master volume and mute, each output's volume, mute, delay and level, each input's gain, mute, sensitivity and 48 V phantom power, input and output EQ, presets, auto standby and power, from the RelayAV app
| Audio Inputs | |
| Inputs | 4x mic/line, balanced or unbalanced |
| Input Level | Max +24dBu (12.28Vrms), balanced line; max +18dBu (6.14Vrms), unbalanced line; min -35dBV (17.78mVrms), balanced mic |
| Input Impedance | 20k Ohm balanced; 10k Ohm unbalanced |
| Input Sensitivity (0dBFS Line-Up) | +24dBu, +14dBu, +4dBu, 0dBV, -18dBV, -35dBV |
| Input Gain | -12dB to +12dB, 0.1dB steps |
| Phantom Power | +48V, switchable per input |
| Audio Outputs | |
| Outputs | 4x line, balanced or unbalanced |
| Output Level | Max +20dBu (7.75Vrms), balanced; max +14dBu (3.875Vrms), unbalanced; min -18dBV |
| Output Impedance | 600 Ohm balanced; 300 Ohm unbalanced |
| Output Delay | 0 to 50ms per output |
| Dante® / Network | |
| Dante® Channels | 4 in / 4 out |
| Audio Format | Dante®/AES67 digital audio in/out, PCM, 44.1kHz–96kHz, 16/24-bit |
| Sampling Rates | 44.1kHz, 48kHz, 88.2kHz, 96kHz |
| Network Bandwidth | 1000M Dante® network |
| Dante® Ports | Primary and secondary |
| Transmission Distance | 328 ft (100m) over CAT6/6A/7 |
| IP Mode | DHCP (default) or static, set separately per network |
| Audio Performance | |
| THD+N | < 0.01% at +4dBu, 1kHz |
| S/N Ratio | at least 105dB at +4dBu, 1kHz, A-weighted |
| Dynamic Range | at least 105dB at +4dBu, 1kHz, A-weighted |
| Frequency Response | 20Hz to 20kHz (±0.5dB) |
| DSP | |
| Parametric EQ | 8 bands on every input and output |
| Filter Types | Parametric, low-pass, high-pass, low-shelf, high-shelf |
| EQ Gain | -15dB to +15dB, 0.1dB steps |
| EQ Frequency | 20Hz to 20kHz |
| EQ Q | 0.02 to 16, 0.01 steps |
| EQ Presets | Flat, Custom1, Custom2; stereo-link mode per channel pair |
| Preset Scenes | 5 |
| Control | |
| Configuration | Built-in Web GUI (Admin and User accounts); Dante® Controller; RelayAV |
| API Control | ASCII commands over TCP/IP (default port 8000) and Telnet (default port 23) |
| Firmware Update | Through the Web GUI |
| Connectors | |
| Mic/Line Inputs | 1x 12-pin 3.5mm Phoenix connector, 4 channels |
| Line Outputs | 1x 12-pin 3.5mm Phoenix connector, 4 channels |
| Dante® Primary | 1x locking RJ45, PoE+ PD (Class 4, IEEE 802.3at); Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control |
| Dante® Secondary | 1x locking RJ45; Dante®/AES67 audio, Web GUI, TCP/IP and RelayAV control |
| DC Power | 1x 2-pin 12V DC locking power jack, max 2.5A |
| Indicators and Buttons | |
| Front Panel | POWER LED, STATUS LED, RESET button |
| Rear Panel | 48V phantom power indicator per input |
| Power | |
| Power Supply | 12V/2.5A locking DC power supply, or PoE+ PD (Class 4, IEEE 802.3at) |
| Power Consumption | 8.64W (max) |
| Physical | |
| Housing | Metal enclosure |
| Color | Black |
| Dimensions (W x D x H) | 7.87 x 7.09 x 1.73 in (200 x 180 x 44 mm) |
| Weight | 2.28 lbs (1.035 kg) |
| Environmental | |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Storage Temperature | -4°F to 140°F (-20°C to 60°C) |
| Operating Humidity | 20% to 80% RH, non-condensing |
| Storage Humidity | 10% to 90% RH, non-condensing |
| Package Contents | |
| 1x | 4x4 Line Audio Bridge with Dante® and PoE+ |
| 1x | 12V/2.5A locking power supply with optional multinational conversion plugs |
| 2x | Mounting ear |
| 10x | Machine screw |
| 2x | 12-pin 3.5mm Phoenix connector (male) |
What filter types and ranges does the parametric EQ offer?
What sample rates and bit depths does the AUD-DTE-4X4LINE support?
What can a control system adjust by command?
What does a typical system with this unit look like?
How do I find the unit on the network the first time?
How do I turn on phantom power for a microphone?
A microphone on one input gives no sound. What should I check?
I cannot reach the Web GUI. What should I check?
What is in the box?
Can it take microphones, or only line-level sources?
Ask Claude, ChatGPT or Copilot about the AUD-DTE-4X4LINE: its specifications, your price, stock, and a draft order for you to place. Or wire the REST API into your quoting tool or ERP.




