4K60 4:4:4 JPEG2000 AV over IP Decoder — Copper + Fiber In One Box

Distributes visually-lossless 4K60 4:4:4 video to any display over the standard 1-Gigabit network you already own — without a 10G switch upgrade. The AVO-IPJP2K-DEC is a black metal-enclosure JPEG2000 AV-over-IP decoder that draws power over the network in PoE PD mode (7.08W maximum, DC 12V/2.5A adapter optional) and integrates both a copper LAN port and an optical fiber port in a single box, so short in-room drops and long inter-building runs terminate on the same unit. It scales point-to-point, video-matrix and video-wall deployments to a 9x9 array by adding switch ports rather than matrix cards — the right choice for boardrooms, divisible conference spaces, control rooms, courtrooms and video-wall installations where visually-lossless 4:4:4 reach, latency determinism and single-vendor endpoint convergence matter more than a 10G fabric or a proprietary matrix chassis.

Built on intra-frame JPEG2000, the decoder holds fine detail crisp across motion and rides standard Layer-3 managed Gigabit switches with IGMP snooping and jumbo frames, in unicast or multicast, with intelligent video-wall class management and MJPEG substream real-time preview for control GUIs. Audio spans ARC/eARC, S/PDIF and analog return, with Dante AV-A mode available when license-activated, while USB 2.0 supports KVM and camera pass-through and RS-232, IR, CEC, two relay ports and two digital I/O channels carry display and contact control. Configuration and control run over front-panel buttons and LED screen, a built-in web page, Telnet and SSH — open control with no mandatory proprietary processor. The single strongest differentiator is copper and fiber converged in one enclosure, removing the media-converter or second SKU that most 1G JPEG2000 endpoints require. The matching AVO-IPJP2K-ENC encoder is sold separately.

• HDCP 2.2 compliant
• Supports 18Gbps video bandwidth
• Input and output video resolution up to 4K60 4:4:4, as specified in HDMI 2.0b
• Signal transmission extended up to 328ft / 100m over CAT5E/6/6A/7 cable
• Transmits video, analog and digital audio, IR, RS-232, CEC and USB over Ethernet
• Integrates copper port and fiber port within a single box
• ARC / eARC / S-PDIF / analog audio return function
• Dante AV-A mode supported when license-activated
• Channel configuration via front-panel buttons and LED screen
• Built-in two-channel relay ports and two-channel digital I/O ports for contact control
• Supports unicast and multicast
• Supports point-to-point, video-matrix and video-wall functions (video wall up to 9x9)
• Intelligent video-wall class management
• Supports MJPEG substream real-time preview
• Operates on standard 1G Ethernet switching
• PoE-powered (PD mode) from the network switch
• Built-in web-page configuration and control, plus Telnet and SSH
• HDMI audio formats: LPCM 2.0/5.1/7.1CH, Dolby Digital/Plus/EX, Dolby TrueHD, DTS, DTS-96/24, DTS-EX DSD, DTS High Res, DTS-HD Master
• USB 2.0 KVM and camera support with bidirectional RS-232 and two-way IR
• Smart networking design for easy and flexible installation